Dell PowerConnect J-EX4200-24T Software Manual page 3579

Table 459: show oam ethernet connectivity-fault-management mep-database Output
Fields (continued)
Field Name Field Description
Maintenance domain name format configured.
Format (Maintenance
domain)
Level Maintenance domain level configured.
Maintenance Maintenance association name.
association name
Maintenance association name format configured.
Format (Maintenance
association)
Continuity-check status.
Continuity-check status
Continuity-check message interval.
Interval
Maintenance association end point (MEP) identifier.
MEP identifier
MEP direction configured.
Direction
MAC address MAC address configured for the MEP.
Auto-discovery Whether automatic discovery is enabled or disabled.
Priority Priority used for CCMs and linktrace messages transmitted by the MEP.
Interface identifier.
Interface name
Local interface status.
Interface status
Local link status.
Link status
Whether the remote MEP is not receiving CCMs.
Remote MEP not
receiving CCM
Whether erroneous CCMs have been received.
Erroneous CCM received
Whether cross-connect CCMs have been received.
Cross-connect CCM
received
RDI sent by some MEP Whether the remote defect indication (RDI) bit is set in messages that have been received. The
absence of the RDI bit in a CCM indicates that the transmitting MEP is receiving CCMs from all
configured MEPs.
CCMs sent Number of CCMs transmitted.
CCMs received out of Number of CCMs received out of sequence.
sequence
Chapter 131: Ethernet OAM Connectivity Fault Management
3507