Dell PowerConnect J-EX4200-24T Software Manual page 3244

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 415: show link-management peer Output Fields (continued)
Field Name Field Description
State State of the control channel:
TxSeqNum Sequence number of the hello message being sent to the peer. The range of values is
4,294,967,295
Sequence number of the last hello message received from the peer. The range of values is
RcvSeqNum
4,294,967,295.
Code that provides information about the control channel. Currently supports only code value
Flags
which indicates that the control channel is restarting after a failure in the control plane, as when the
Link Management Protocol (LMP) process starts or restarts.
TE links Traffic-engineered links that are managed by their peer.
show show
link-management peer link-management peer
3172
Up
.
user@host> show link-management peer
Peer name: sonet, System identifier: 41448
State: Up, Control address: 70.70.70.70
Hello interval: 10000, Hello dead interval: 30000
CC local ID CC remote ID State
3265
TE links:
to-sonet
or Down .
TxSeqNum
0 ConfSnd
1 through
0
RcvSeqNum Flags
1 0 R
through
,
R