Dell PowerConnect J-EX4200-24T Software Manual page 3182

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Related
Documentation
3110
Configure this Layer 3 customer-edge interface for the routing protocol:
8.
[edit]
user@switch# set protocols ospf area 0.0.0 interface ge-2/0/3
Configure an LSP on the egress PE switch (
9.
MPLS to the ingress PE switch (
[edit protocols mpls]
user@switch# set label-switched-path ip_lsp29_javae from 208.208.208.208
user@switch# set label-switched-path ip_lspjavae_29 to 100.100.100.100
Disable constrained-path LSP computation for this LSP:
10.
[edit protocols mpls]
user@switch# set label-switched-path ip_lsp29_javae no-cspf
Configure a static route from the ingress PE switch to the egress PE switch, thereby
11.
indicating to the routing protocol that the packets will be forwarded over the MPLS
LSP that has been set up to that destination:
[edit]
user@switch# set routing-options static route 121.121.121.0/24 next-hop 208.208.208.208
user@switch# set routing-options static route 121.121.121.0/24 resolve
Example: Configuring MPLS on J-EX Series Switches on page 3071
Configuring MPLS on Provider Switches (CLI Procedure) on page 3102
Configuring an OSPF Network (J-Web Procedure) on page 1435
Verifying That MPLS Is Working Correctly on page 3115
Understanding Junos OS MPLS Components for J-EX Series Switches on page 3059
208.208.208.208
):
100.100.100.100
) to send IP packets over