Dell PowerConnect J-EX4200-24T Software Manual page 2989

Table 371: Classifiers Configuration Fields (continued)
Field
Code Point Mapping
Related
Documentation
Function
Sets the forwarding classes and the packet loss
priorities (PLPs) for specific CoS values and
aliases.
Defining CoS Classifiers (CLI Procedure) on page 2914
Example: Configuring CoS on J-EX Series Switches on page 2883
Monitoring CoS Classifiers on page 2935
Understanding CoS Classifiers on page 2867
Chapter 109: Configuring CoS
Your Action
To add a code point mapping:
1. Click .
Add
2. Select the code point.
3. Select a forwarding class from the following
list:
expedited-forwarding—Provides low loss,
low delay, low jitter, assured bandwidth,
and end-to-end service. Packets can be
forwarded out of sequence or dropped.
best-effort—Provides no special CoS
handling of packets. Typically, RED drop
profile is aggressive and no loss priority is
defined.
assured-forwarding—Provides high
assurance for packets within the specified
service profile. Excess packets are
dropped.
network-control—Packets can be delayed
but not dropped.
4. Select the loss priority.
To assign a loss priority, select one:
high—Packet has a high loss priority.
low—Packet has a low loss priority.
2917