Dell PowerConnect J-EX4200-24T Software Manual page 3617

Required Privilege
Level
List of Sample Output
Output Fields
traceroute traceroute
Chapter 134: Operational Mode Commands for General Network Management and Monitoring
no-resolve —(Optional) Do not attempt to determine the hostname that corresponds to
the IP address.
routing-instance routing-instance-name
traceroute attempt.
source source-address —(Optional) Source address of the outgoing traceroute packets.
tos value —(Optional) Value to include in the IP type-of-service (ToS) field. The range of
values is 0 through 255
—(Optional) Maximum time-to-live value to include in the traceroute request.
ttl value
The range of values is
—(Optional) Maximum time to wait for a response to the traceroute request.
wait seconds
network
traceroute on page 3545
traceroute as-number-lookup host on page 3546
traceroute noresolve on page 3546
traceroute (Between CE Routers, Layer 3 VPN) on page 3546
traceroute (Through an MPLS LSP) on page 3546
Table 467 on page 3545 describes the output fields for the
fields are listed in the approximate order in which they appear.
Table 467: traceroute Output Fields
Field Name
traceroute to
hops max
byte packets
number-of-hops
router-name
address
Round trip time
user@host> traceroute santacruz
traceroute to green.company.net (10.156.169.254), 30 hops max, 40 byte packets
1 blue23 (10.168.1.254)
2 red14 (10.168.255.250)
—(Optional) Name of the routing instance for the
.
0 through 128 .
Field Description
IP address of the receiver.
Maximum number of hops allowed.
Size of packets being sent.
Number of hops from the source to the named router or switch.
Name of the router or switch for this hop.
Address of the router or switch for this hop.
Average round-trip time, in milliseconds (ms).
2.370 ms 2.853 ms
0.778 ms 2.937 ms
command. Output
traceroute
0.367 ms
0.446 ms
3545