Mac-Move-Limit - Dell PowerConnect J-EX4200-24T Software Manual

mac-move-limit

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
mac-move-limit limit action action;
[edit ethernet-switching-options secure-access-port vlan (all | vlan-name)]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Specify the number of times a MAC address can move to a new interface (port) in 1
second and the action to be taken by the switch if the MAC address move limit is exceeded.
The default move limit is unlimited. The default action is
—Maximum number of moves to a new interface per second.
limit
—(Optional) Action to take when the MAC address move limit is reached:
action action
—Drop the packet and generate an alarm, an SNMP trap, or a system log entry.
drop
This is the default.
—Do not drop the packet but generate an alarm, an SNMP trap, or a system log
log
entry.
none —No action.
shutdown —Disable the VLAN and generate an alarm. If you have configured the switch
with the port-error-disable
upon expiration of the specified disable timeout. If you have not configured the switch
for autorecovery from port error disabled conditions, you can bring up the disabled
interfaces by running the
routing—To view this statement in the configuration.
routing–control—To add this statement to the configuration.
mac-limit on page 2684
Example: Configuring Port Security, with DHCP Snooping, DAI, MAC Limiting, and MAC
Move Limiting, on a J-EX Series Switch on page 2569
Configuring MAC Move Limiting (CLI Procedure) on page 2639
Configuring MAC Move Limiting (J-Web Procedure) on page 2641
Configuring Autorecovery From the Disabled State on Secure or Storm Control Interfaces
(CLI Procedure) on page 2516
Chapter 98: Configuration Statements for Port Security
statement, the disabled interfaces recover automatically
clear ethernet-switching port-error
drop .
command.
2685