Configuring Trigger Port Forwarding; Figure 7-8 Trigger Port - Nortel Contivity 221 User Manual

Hide thumbs Also See for Contivity 221:

Table of Contents

2. If an application needs a continuous data stream, that port (range) will be tied up so that

another computer on the LAN can't trigger it.

Configuring Trigger Port Forwarding

To change your Contivity 221's trigger port settings, click SUA/NAT and the Trigger Port tab.

The screen appears as shown.

Only one LAN computer can use a trigger port (range) at a time.

The following table describes the fields in this screen.

317517-A Rev 00