Specifications; Base Unit - Nortel Passport 4400 Series Hardware Installation Manual

Hide thumbs Also See for Passport 4400 Series:
Table of Contents

Advertisement

Introduction
!
When working inside the unit, be sure to take all precautions against
electrostatic discharge:
• Wear a grounding strap to protect the equipment while the unit is open.
• To discharge any buildup of static electricity, touch any metal part of the
unit before handling any module.
• Avoid working on carpet.
Specifications
Note: Model numbers listed with a lowercase "x" indicate a revision

Base Unit

Physical Dimensions
3-slot Unit
Width
Height
Depth
5-slot Unit
Width
Height
Depth
5-slot Unit with Redundant Power Supply
Width
Height
Depth
WARNUNG, AVERTISSEMENT
Warning:
Remove power plug from the power socket, or disconnect dc
power, before performing any service work on the unit.
Vor öffnen des Gerätes, muss der Netzstecker aus der
Steckdose gezogen werden.
Débrancher la prise de courant avant d'entreprendre aucun
travail de réparation de l'appareil.
number for the selected model. For instance, model number
NTAU03xx represents all model numbers that begin with
NTAU03.
18 inches (45.7 cm)
5 inches (12.7 cm)
12.75 inches (32.4 cm)
18 inches (45.7 cm)
7.75 inches (19.7 cm)
12.75 inches (32.4 cm)
18 inches (45.7 cm)
8.25 inches (21.0 cm)
12.75 inches (32.4 cm)
Passport 4400 Hardware Installation Manual
1-5

Advertisement

Table of Contents
loading

Table of Contents