Functions Not Directly Programmable - Fluke CombiScope PM3370B User Manual

USING THE COMBISCOPE INSTRUMENTS

3.18 Functions not Directly Programmable

Not all front panel functions are individually programmable with SCPI commands.
However, the SYSTem:SET and
the following functions:
- Cursor functions
- Logic Triggering
- Event functions
- DTB functions
- X pos
- Display menu functions
- Pass/Fail functions
Other functions and keys that are not individually programmable with SCPI
commands are accessible using the SYSTem:KEY command. They are:
- Roll mode
- Trigger noise
- TEXT OFF key
- STATUS key
- MAGNIFY keys
- ENVELOPE
- MULTiple-shot
SAV/
* *
see CURSORS menu (appendix B.2.2)
see TRIGGER menu (appendix B.2.10)
see TB MODE menu (appendix B.2.9)
see DTB (DEL'D TB) menu (appendix B.2.6)
see X POS button
see DISPLAY menu (appendix B.2.3)
see MATHPLUS MATH menu
(appendix A5 and B.2.4.)
DISPlay:MENU TBMode;:SYSTem:KEY 3 toggles on/off
DISPlay:MENU TRIGger;:SYSTem:KEY 4 toggles on/off
SYSTem:KEY 801 selects next option
SYSTem:KEY 201 toggles on/off
SYSTem:KEY 210/211 selects previous/next step
DISPlay:MENU ACQuire;:SYSTem:KEY 3 toggles on/off
DISPlay:MENU TBMode;:SYSTem:KEY 1 (up)or 2 (down)
(after INITiate:CONTinuous OFF)
RCL commands can be used to access
3 - 81