Fluke CombiScope PM3370B User Manual page 146

4 - 46
DISPlay:MENU[:NAME]
Syntax: DISPlay:MENU[:NAME] <character_data>
<character_data>
TBMode
TRIGger
DMODe
SETups
CURSors
ACQuire
DISPlay
MATH
MEASure
SAVE
RECall
UTIL
VERTical
Description:
The DISPlay:MENU command can be used to select a softkey menu by
specifying a predefined name. Additionally, the display of the softkey menu field
is switched ON. So, the execution of the DISPlay:MENU command is coupled to
the execution of the DISPlay:MENU:STATe ON command. The menus ACQuire,
DISPlay, MATH, MEASure, SAVE, and RECall are available in the digital mode.
If they are specified in the analog mode, error -221 "Settings conflict;Digital mode
required" is generated.
After a RST command, the mode is set at TBMode without display of the TB
*
MODE softkey menu field.
Example:
→
Send DISPlay:MENU TBMode
Front panel compliance:
The DISPlay:MENU command is the remote equivalent of the front panel menu
buttons TB MODE, TRIGGER, DTB, SETUPS, CURSORS, ACQUIRE, DISPLAY,
MATH, MEASURE, SAVE, RECALL, UTILITY, and VERT MENU.
COMMAND REFERENCE
FRONT PANEL SOFTKEY NAME
TB MODE
TRIGGER
DTB
SETUPS
CURSORS
ACQUIRE
DISPLAY
MATH
MEASURE
SAVE
RECALL
UTILITY
VERT MENU
Selects and displays the TB MODE softkey
menu.
(main time base)
(delayed time base)