Fluke CombiScope PM3370B User Manual page 224

4 - 124
TRIGger[:SEQuence[1]]:SOURce
TRIGger[:STARt]:SOURce
Syntax: TRIGger[:SEQuence[1]]:SOURce IMMediate | INTernal<n> |
Alias: TRIGger[:STARt]:SOURce IMMediate | INTernal<n> |
IMMediate
INTernal<n> Input channel <n> is used as trigger source.
EXTernal
LINE
BUS
Query form: TRIGger[:SEQuence[1]]:SOURce?
TRIGger[:STARt]:SOURce?
Response: IMM | INT<n> | EXT | LINE | BUS
IMM
INT<n>
EXT
LINE
BUS
Immediate sweeping (no waiting for a trigger).
<n> = 1, 2, 3 or 4.
Input channel 4 is used as external trigger source
(only for PM33x0B).
The source signal is determined from the AC line
voltage.
Triggering is done by a
code via the GPIB.
Immediate sweeping (no waiting for a trigger).
Input channel <n> used as trigger source.
<n> = 1, 2, 3 or 4.
Input channel 4 used as external trigger source (only
for PM33x0B).
The source signal determined from the AC line
voltage.
Triggering done by a
via the GPIB.
COMMAND REFERENCE
EXTernal | LINE | BUS
EXTernal | LINE | BUS
TRG command or GET
*
TRG command or GET code
*