Fluke CombiScope PM3370B User Manual page 217

COMMAND REFERENCE
TRIGger[:SEQuence[1]]:FILTer:LPASs:FREQuency
TRIGger[:STARt]:FILTer:LPASs:FREQuency
TRIGger[:SEQuence[1]]:FILTer:LPASs:STATe
TRIGger[:STARt]:FILTer:LPASs:STATe
Syntax: TRIGger[:SEQuence[1]]:FILTer:LPASs:FREQuency <NRf>
TRIGger[:SEQuence[1]]:FILTer:LPASs:STATe <Boolean>
Alias: TRIGger[:STARt]:FILTer:LPASs:FREQuency <NRf>
TRIGger[:STARt]:FILTer:LPASs:STATe <Boolean>
<NRf>
<Boolean> 0 | OFF
Query form: TRIGger[:SEQuence[1]]:FILTer:LPASs:FREQuency?
Alias: TRIGger[:STARt]:FILTer:LPASs:FREQuency?
Response: 0.00E+00 | 1.00E+01 | 3.0E+04
If MINimum was specified, the minimum possible cutoff frequency
is returned, i.e., 0 Hz. If MAXimum was specified, the maximum
possible cutoff frequency is returned, i.e., 30 KHz.
Query form: TRIGger[:SEQuence[1]]:FILTer:LPASs:STATe?
Alias: TRIGger[:SEQuence[1]]:FILTer:LPASs:STATe?
Response: 0 | 1
0
1
The cutoff frequency expressed in hertz. Possible
values are:
- 0
- 10
- 30000
1 | ON
High-pass filter active (HF-reject).
Low-pass filter active.
Defines trigger DC coupling (MINimum).
Defines trigger AC coupling.
Defines LF-reject (MAXimum).
Sets low-pass filter off.
Sets low-pass filter on.
4 - 117
| MINimum | MAXimum
| MINimum | MAXimum
MINimum | MAXimum
MINimum | MAXimum