Fluke CombiScope PM3370B User Manual page 121

COMMAND REFERENCE
OPT? Option identification
*
Syntax: OPT?
*
Response: <option> {,<option>}
<option>
<name>
<serial_nr>
<sw_level>
Description:
The OPT? query reports which options are present.
*
If <option> = IEEE:0:0, the IEEE-488.2/SCPI option is installed.
If <option> = EXT:0:0, the EXTernal trigger option is installed.
If <option> = EM:0:0, Extended Memory is available.
If <option> = MP:0:0, the Math Plus option is installed.
Example:
→
Send *OPT?
←
Read IEEE:0:0,MP:0:0
Front panel compliance:
The OPT? query is the remote equivalent of the Maintenance option of the
*
UTILITY menu.
<name>:<serial_nr>:<sw_level>
IEEE | EXT | EM | MP
Serial number is always 0.
Software level is always 0.
The IEEE and MathPlus option are
available.
4 - 21