4 - 96
SYSTem:BEEPer
SYSTem:BEEPer:STATe
Syntax:
SYSTem:BEEPer
SYSTem:BEEPer:STATe <Boolean>
Query form: SYSTem:BEEPer:STATe?
Response:
0 | 1
0
1
Description:
The SYST:BEEP command causes a beep of about 1 second to be generated by
the instrument, even if the SYSTem:BEEPer:STATe is OFF.
The SYST:BEEP:STAT command enables or disables the beeper of the
instrument. If the STATe is turned OFF, no instrument condition will cause an
audible beep to be emitted.
After a
RST command, the beeper is turned on.
*
Example:
→
Send
SYSTem:ERRor?
←
Read
error_number,"error_description"
IF error_number = 0 THEN
→
send
SYSTem:BEEPer
END IF
→
Send
SYSTem:BEEPer:STATe OFF
→
Send
SYSTem:BEEPer
Front panel compliance:
The SYSTem:BEEPer:STATe command is the remote equivalent of the front
panel BEEP ON OFF option of the UTILITY menu.
Beeper disabled.
Beeper enabled.
COMMAND REFERENCE
Reads the error queue.
Beeps on error.
Turns automatic beeper off.
Generates a beep.