Fluke CombiScope PM3370B User Manual page 140

4 - 40
CALCulate<n>:TRANsform:HISTogram:STATe
Syntax: CALCulate<n>:TRANsform:HISTogram:STATe <Boolean>
<n> [1] | 2
Query form: CALCulate<n>:TRANsform:HISTogram:STATe?
Response: 0 | 1
0
1
Description:
This command switches the HISTogram function on or off. The result of the
histogram function is stored in M1_1 for CALCulate1 and in M2_1 for
CALCulate2.
After a RST command, the histogram function is turned off.
*
Example:
→
Send CALCulate:TRANsform:HISTogram:STATe ON
Front panel compliance:
The CALCulate1 and CALCulate2 commands use the MATH1 and MATH2
features of the CombiScope instrument.
Histogram function turned off.
Histogram function turned on.
COMMAND REFERENCE
Switches the
histogram
function on.