Fluke CombiScope PM3370B User Manual page 137

COMMAND REFERENCE
CALCulate<n>:MATH:STATe
Syntax: CALCulate<n>:MATH:STATe <Boolean>
<n> [1] | 2
Query form: CALCulate<n>:MATH:STATe?
Response: 0 | 1
0
1
Description:
This command switches the specified mathematics function on or off. If the
mathematics function is switched on, the internal scale and offset are reset to
initial values. The result of the mathematics function is stored in M1_1 for
CALCulate1 and in M2_1 for CALCulate2.
After a RST command, the mathematics function is turned off.
*
Example:
→
Send CALCulate:MATH (CH1-CH2)
→
Send CALCulate:MATH:STATe ON
Front panel compliance:
The CALCulate1 and CALCulate2 commands use the MATH1 and MATH2
features of the CombiScope instrument.
Mathematics function turned off.
Mathematics function turned on.
Selects MATH1 channel 1 - 2.
Switches MATH1 function on.
4 - 37