Fluke CombiScope PM3370B User Manual page 125

COMMAND REFERENCE
SAV Save instrument setup
*
Syntax: SAV <numeric_data>
*
Description:
The SAV command saves the current instrument settings into one of the internal
*
memory registers 1 .. 10. The settings in memory register 0 are standard settings,
which can only be recalled. The settings in the memory registers 0 through 10 can
be recalled by sending the
Example:
→
SAV 2
Send
*
.
.
→
RCL 2
Send
*
Front panel compliance:
The SAV/ RCL commands are the remote equivalent of the front panel softkey
* *
operation via the SETUPS/RECALL menu. The standard settings stored in
memory 0 can be changed via the front panel FRONT SETUPS menu.
RCL command.
*
Stores the actual instrument settings into
memory register 2.
Restores the instrument settings from memory
register 2.
4 - 25