Fluke CombiScope PM3370B User Manual page 119

COMMAND REFERENCE
IDN? Identification
*
Syntax: IDN?
*
Response: <manufacturer>,<model>,<serial_number>,<sw_level>
<manufacturer>
<model>
<serial_number>
<sw_level>
<sw_id>
<mask_id>
<UFO_id>
Description:
The IDN? query reports the identification of the instrument. The response to the
*
IDN? query consists of the fields above in Arbitrary ASCII Response Data
*
format. This implies that the
message unit, because the arbitrary ASCII response data is terminated with the
New Line character (10 decimal).
The <sw_id> parameter identifies the type, version, and date of the instrument
firmware.
The <mask_id> parameter identifies the version of the Universal Host Mask
processor software.
The <UFO_id> parameter identifies the version of the Universal Front processor
software.
Example:
→
Send *
IDN?
←
Read
FLUKE,PM3384B,0,SW3394BIM V4.0 1996-10-02:UHM V1.0:UFO V2.0
Front panel compliance:
The IDN? query is the remote equivalent of the Maintenance option of the
*
UTILITY menu.
E.g., FLUKE
E.g., PM3394B
Always 0
<sw_id>:<mask_id>:<UFO_id>
Firmware identification, consisting of:
- Software type, e.g., SW3394BIM
(I=IEEE, M=Math Plus)
- Software version, e.g., V4.0
- Software date (year-month-day)
Mask identification, e.g., UHM V1.0
UFO identification, e.g., UFO V2.0
IDN? query must be the last query in a program
*
4 - 19