Fluke CombiScope PM3370B User Manual page 187

COMMAND REFERENCE
SENSe:VOLTage<n>[:DC]:RANGe:OFFSet
Syntax: SENSe:VOLTage<n>[:DC]:RANGe:OFFSet <NRf>
<n>
<NRf>
MINimum
MAXimum
Query form: SENSe:VOLTage<n>[:DC]:RANGe:OFFSet?
Response: <NR3>
<NR3>
If MINimum was specified, the minimum possible value is returned.
If MAXimum was specified, the maximum possible value is
returned.
Description:
Controls the vertical offset for an input channel. The vertical offset for channel <n>
is expressed in volts. If a detectable probe is attached, the offset value is
considered to be at the probe tip, otherwise at the BNC plug.
After a RST command, the vertical offset for each channel is zero.
*
Coupled values:
The range of the offset value is directly coupled to the range of the vertical
sensitivity per division (SENSe:VOLTage<n>:RANGe:PTPeak).
Example:
→
Send SENSe:VOLTage2:RANGe:OFFSet 1E-1
Front panel compliance:
The SENSe:VOLTage<n>:RANGe:OFFSet command is the remote equivalent of
the front panel POS knobs.
[1] | 2 | 3 | 4
Note: Channel 3 and 4 not applicable for PM33x0B.
The vertical offset for channel <n> in volts.
Selects the minimum possible vertical offset.
Selects the maximum possible vertical offset.
The vertical offset for channel <n> in volts.
| MINimum | MAXimum
[ MINimum | MAXimum]
Sets 100 mV offset for
channel 2.
4 - 87