Site Preparation - Compaq ES40CSLP Installation, User & Service Manual

Installation

2.2 Site Preparation

The installation instructions that follow assume that:
•
All cables that you plan to connect to your system are in place and clearly labeled. These
cables are:
Terminal data cables
Telephone cables
Network cables
•
The specifications and conditions listed in Appendix A have been met.
•
The system is located in an area that provides sufficient clearance for ventilation and
servicing. A clearance of 61 cm (24 in.) at the rear and 129.6 cm (51 in.) at the front of the
cabinet is required for service.
_____________________________Caution__________________________
Do not impede airflow by obstructing the front and rear of the cabinet. Exceeding
internal thermal limits can affect system reliability.
______________________________________________________________
____________________________WARNING_________________________
The ES40CSLP rackmount system can weigh up to 40.82 kg (90 lb). To
prevent personal injury and equipment damage, ensure that the system is
contained in an enclosure that can be stabilized when the system is pulled out
on its slides.
______________________________________________________________
___________________________ ACHTUNG ________________________
Das ES40CSLP Rackmount System kann bis zu 40,82 kg (90 lb) wiegen. Um
Personen- und Geräteschaden zu vermeiden, sollten Sie deshalb sicherstellen,
daß sich das System in einem Gehäuse befindet, das stabilisiert werden kann,
wenn das System an den Schienen herausgezogen wird.
______________________________________________________________
2–2 Compaq ES40CSLP Rackmount System Installation/User/Service Guide