Net - Compaq ES40CSLP Installation, User & Service Manual

Troubleshooting and Diagnostics
Diagnostic Name
memtest
Expected value:
Received value:
Failing addr:
*** End of Error ***
P00>>>

6.6.2.11 net

The net command performs maintenance operations on a specified Ethernet port. Net -ic
initializes the MOP counters for the specified Ethernet port, and net -s displays the current
status of the port, including the contents of the MOP counters.
Syntax
net -ic <port_name>
or
net –s <port_name>
Arguments
<port_name>
Example
P00>>> net -ic ewa0
P00>>> net -s ewa0
Status counts:
ti: 72 tps: 0 tu: 47 tjt: 0 unf: 0 ri: 70 ru: 0
rps: 0 rwt: 0 at: 0 fd: 0 lnf: 0 se: 0 tbf: 0
tto: 1 lkf: 1 ato: 1 nc: 71 oc: 0
MOP BLOCK:
Network list size: 0
MOP COUNTERS:
Time since zeroed (Secs): 3
TX:
Bytes: 0 Frames: 0
Deferred: 0 One collision: 0 Multi collisions: 0
TX Failures:
Excessive collisions: 0 Carrier check: 0 Short circuit: 0
Open circuit: 0 Long frame: 0 Remote defer: 0
Collision detect: 0
RX:
Bytes: 0 Frames: 0
Multicast bytes: 0 Multicast frames: 0
RX Failures:
Block check: 0 Framing error: 0 Long frame: 0
Unknown destination: 0 Data overrun: 0 No system buffer: 0
No user buffers: 0
P00>>>
6–38 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
ID Device
000000f9 brd0
ffffffff
0
400000
Specifies the Ethernet port on which to operate, either ei*0 or ew*0.
Pass Test Hard/Soft
9 1 1 0
1-JAN-1999
12:00:01