Attaching The Inner Races To The Chassis; Figure 2-3 Attaching The Inner Slide Races - Compaq ES40CSLP Installation, User & Service Manual

2.4.4 Attaching the Inner Races to the Chassis

To attach the inner slide races to the chassis, refer to Figure 2-3 and proceed as follows:
____________________________ Caution __________________________
When performing this procedure, ensure that the arrow
points upward and the locking lever
Otherwise, the slide will be damaged when the system is installed on the slide
assemblies.
______________________________________________________________
1. Attach the right inner slide race
from the front) using four 8-32 pan-head screws
2. Attach the left inner slide race
from the front) using four 8-32 pan-head screws

Figure 2-3 Attaching the Inner Slide Races

4
š
›
to the lower right side of the system chassis (as viewed

to the upper left side of the system chassis (as viewed
5
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 2–7
™
(shown in Figure 2-3)
points toward the front of the system.
œ
.
œ
.
1
4
Installation
2
3
EA-00061