Connecting A Vga Monitor Or Serial Terminal; Figure 2-6 Terminal Connections - Compaq ES40CSLP Installation, User & Service Manual

Installation
2.5 Connecting a VGA Monitor or Serial T erminal
Either an optional VGA monitor or a Compaq VT-series terminal (VTxxx) can be connected to
the system as shown in Figure 2-6. If a VGA monitor is connected, a VGA adapter must first be
installed in PCI Bus 0, slot 4.
_____________________________Caution__________________________
Before connecting a terminal to the system, turn off the ac power to the system
with the power On/Off button on the OCP and disconnect the power cord from the
power supply ac input receptacle on the rear of the chassis.
______________________________________________________________
For information about connecting a specific terminal to your system, refer to the documentation
for that terminal.

Figure 2-6 Terminal Connections

1
2
3
c
VGA monitor
š
Keyboard
›
Serial terminal
2–10 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
VT
5
4
œ
Mouse

VGA controller (PCI bus 0, Slot 4)
EA-00064