Terminal Setup; Entering The Rmc; Figure 4-3 Setup For Rmc - Compaq ES40CSLP Installation, User & Service Manual

4.4 Terminal Setup

The RMC can be accessed through a modem hookup or from the serial terminal connected to
the system.
•
The RMC connections are shown in
Figure 4-3.
•
For remote monitoring, connect a modem to the remote console modem port
•
For local monitoring connect a serial terminal to the local COM1 serial port/terminal port
(MMJ)

Figure 4-3 Setup for RMC

VT

4.5 Entering the RMC

An escape sequence is used to invoke the remote management console. The remote
management console can be accessed through a modem, from a local serial console terminal,
from a local VGA monitor, or from the system. The "system" includes the operating system,
the SRM console, or an application.
•
You can enter the RMC from the local terminal regardless of the current operating mode
•
You can enter the RMC from the modem if the RMC is in through mode, snoop mode, or
local mode. In snoop mode, the escape sequence is passed to the system and displayed.
_____________________________ Note____________________________
Only one RMC session can be active at a time.
______________________________________________________________
š
.
2
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 4–5
Remote System Management
.
1
EA-00078
c
.