Displaying The System Environment - Compaq ES40CSLP Installation, User & Service Manual

Remote System Management

4.7.3 Displaying the System Environment

Use the RMC env command to get a snapshot of the system environment, including the state of
CPUs, fans, and power supplies.
RMC>env
System Hardware Monitor
Temperature (warnings at 45.0°C, power-off at 50.0°C)
CPU0: 26.0°C
Fans RPM
Fan1: 2295
Fan4: 2235
Power Supplies(OK, FAIL, OFF, '----' means not present)
PS0 : OK
CPU0: OK
CPU CORE voltage
CPU0: +2.192V
CPU IO voltage
CPU0: +1.488V
Bulk voltage
+3.3V Bulk: +3.328V
c
CPU temperature. In this example four CPUs are present.
š
Fan RPM. All fans operate as long as the system is powered on. Fans 1 through 4 are the
system fans and Fan 5 is the PCI fan.
›
The normal power supply mode is either OK (system is powered on) or OFF (system is
powered off or the power supply cord is not plugged in). FAIL indicates a problem with a
supply.
œ
CPU CORE voltage and CPU I/O voltage. In a healthy system, the readings for all CPUs
should be the same.

Bulk power supply voltage.
4–10 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
CPU1: 26.0°C
Fan2: 2295
Fan5: 2500
PS1 : ----
CPU1: OK
CPU1: +2.192V
CPU1: +1.488V
+5V Bulk: +5.076V
Vterm: +1.824V Cterm: +2.000V
CPU2: 27.0°C CPU3: 26.0°C
Fan3: 2205
PS2 : ----
CPU2: OK CPU3: OK
CPU2: +2.192V CPU3: +2.192V
CPU2: +1.488V CPU3: +1.488V
+12V Bulk: +12.096V
-12V Bulk: -12.480V
™
š
›
œ
