Connecting The Power Cord; Figure 2-5 Connecting The Power Cord - Compaq ES40CSLP Installation, User & Service Manual

2.4.6 Connecting the Power Cord

To install the power cord, refer to Figure 2-5 and proceed as follows:
1. Attach the power cord
the chassis.
_____________________________ Note____________________________
At this time, leave the other end of the power cord disconnected from the cabinet
power distribution unit.
______________________________________________________________

Figure 2-5 Connecting the Power Cord

™
to the power supply ac input receptacle
2
1
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 2–9
Installation
š
located on the rear of
EA-00063