Table C-2 System Motherboard Switchpack E296 Settings; Table C-3 System Motherboard Switchpack E16 Settings - Compaq ES40CSLP Installation, User & Service Manual

Jumpers and Switches
The following are the settings for the FIR_FUNC jumpers (J20, J22, and J23).
Setting
000
001
010
111
Table C-2 lists the switches on the system motherboard switchpack E296 along with the switch
name and the default position. Figure C-1 shows the location of switchpack E296.

Table C-2 System Motherboard Switchpack E296 Settings

Switch
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW8
SW9
SW10
Table C-3 lists the switches on the system motherboard switchpack E16 along with the switch
name and the default position. This switchpack is used to set the system motherboard MAIN
CLOCK frequency. Figure C-1 shows the location of switchpack E16.

Table C-3 System Motherboard Switchpack E16 Settings

Switch
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW8
SW9
SW10
C–2 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
Meaning
Normal
Prevent flash loads. Load from SROM.
Load from floppy
Lock console. This setting prevents the writing of flash from CPUs.
Name Default Position
SYS_EXT_DELAY1 Off
SYS_EXT_DELAY0 On
SYS_FILL_DELAY Off
CPU_CFWD_PSET Off
PCI_CLK_DIV_IN1 Off
PCI_CLK_DIV_IN0 On
Y_DIV3 On
Y_DIV2 On
Y_DIV1 Off
Y_DIV0 Off
Name Default Position
M0 On
M1 On
M2 On
M3 Off
M4 On
M5 Off
M6 On
N0 Off
N1 On
XTAL_SEL Off