Figure 2-10 Installing Optional Cpu Modules - Compaq ES40CSLP Installation, User & Service Manual

Installation
7. Put on an antistatic wriststrap.
_____________________________Caution__________________________
An antistatic wriststrap must be worn when handling any module to prevent
damage to the module.
______________________________________________________________
8. Hold the CPU module to be installed by the module levers at each end of the module and
align the CPU module with the chosen slot (see Figure 2-10).
9. Slide the CPU
10. Push down on the two module levers to lock the CPU module into the slot.
After installing the CPU module, reverse steps 1 through 5 and reboot the system. To verify the
installation, observe the screen display during power-up to see if the newly installed CPU
module appears in the display. Issue the show config command from the SRM console to
display the status of the new CPU module.

Figure 2-10 Installing Optional CPU Modules

2–14 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
c
module down into the slot until it stops.
1
EA-00068