Paddle Card; Figure 5-19 Removing And Replacing The Paddle Card - Compaq ES40CSLP Installation, User & Service Manual

Removal and Replacement

5.20 Paddle Card

Perform the following procedure to remove the paddle card:
1. Extend the chassis for service (see Section 5.2).
2. Remove the PCI access cover (see Section 5.5).
3. Disconnect the two ribbon cables
(see Figure 5-19).
4. Remove the two screws
bracket and lift the paddle card and bracket out of the chassis (see Figure 5-19).
5. Remove the five screws
6. Disconnect the ribbon cable
To replace the paddle card, refer to Figure 5-19 and reverse steps 1 through 6 of the removal
procedure.

Figure 5-19 Removing and Replacing the Paddle Card

4
5–22 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
›
from the right side of the chassis that secure the paddle card
œ
that secure the paddle card to the bracket (see Figure 5-19).

from the bottom of the paddle card (see Figure 5-19).
1
2
5
c š
and one power cable from the top of the paddle card
3
EA-00070