Installing An Mx104 Air Filter; Figure 39: Installing The Air Filter - Juniper MX104 Hardware Manual

Related
Documentation

Installing an MX104 Air Filter

Copyright © 2017, Juniper Networks, Inc.

Figure 39: Installing the Air Filter

MX104 Cooling System and Airflow Overview on page 19
The air filter installs on the right side of the fan tray. To install the air filter (see
Figure 39 on page 145):
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Locate the THIS SIDE MUST FACE OUT label and ensure that the air filter is right side
2.
up.
Insert the air filter into the groove located toward the front of the fan tray.
3.
Press the tab on the rear of the fan tray to allow the air filter to slide into place.
4.
Chapter 20: Replacing Cooling System Component
145