Mic Leds; Power Supply Led; Routing Engine Leds; Mx104 Leds Overview - Juniper MX104 Hardware Manual

MIC LEDs

Power Supply LED

Routing Engine LEDs

Related
Documentation

MX104 LEDs Overview

Alarm LEDs on the Front Panel

Copyright © 2017, Juniper Networks, Inc.
Each hot-removable and hot-insertable MIC has LEDs located on the faceplate. For more
information about LEDs on the MIC faceplate, see the "LEDs" section for each MIC in the
MX Series Interface Module Reference
For information about the built-in MIC LEDs, see
One LED labeled
PS STATUS
information, see "Power Supply LEDs" on page
Three LEDs indicate the status of the Routing Engine. For more information, see
Routing Engine LEDs" on page
Troubleshooting Resources for MX104 Routers on page 197
MX104 Chassis Overview on page 4
Alarm LEDs on the Front Panel on page 13
System LED on the Front Panel on page 14
MIC LEDs on page 15
Power Supply LED on page 15
Routing Engine LEDs on page 15
Two LEDs, located to the right of the alarm contact port indicates major and minor alarms
for the router (see Figure 6 on page
Chapter 2: Chassis Components and Descriptions
.
"MIC LEDs" on page
indicates the status of the power supply. For more
61.
23.
12).
49.
"MX104
13