Maintaining The Mx104 Mics And Network Ports; Maintaining The Mx104 Routing Engines - Juniper MX104 Hardware Manual

MX104 3D Universal Edge Router Hardware Guide
Related
Documentation

Maintaining the MX104 MICs and Network Ports

Purpose
Action
Meaning
Related
Documentation

Maintaining the MX104 Routing Engines

Purpose
Action
192
Routine Maintenance Procedures for the MX104 Router on page 187
Troubleshooting Resources for MX104 Routers on page 197
Replacing an MX104 Fiber-Optic Cable on page 139
Replacing an MX104 Transceiver on page 166
For optimum performance, verify the condition of the network ports.
On a regular basis:
Check the port LEDs. The meaning of the LED states differs for various uplink ports.
For more information, see
port failure, the router generates an alarm message to be sent to the Routing Engine.
A green status LED indicates that the port is functioning normally.
From the CLI, issue the show chassis fpc pic-status
user@host> show chassis fpc pic-status
Slot 0 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
Slot 1 Online
PIC 0 Online
PIC 1 Online
Slot 2 Online
PIC 0 Online
Online is displayed in the second column if a MIC is functioning normally.
For further description of the output from the command, see the show chassis fpc
command summary in the
MX104 Hardware and CLI Terminology Mapping on page 6
For optimum router performance, verify the condition of the Routing Engines.
On a regular basis:
Check the Routing Engine LEDs. For more information about the LEDs and the display,
see "MX104 Routing Engine LEDs" on page
"MX104 LEDs Overview" on page
10x 1GE(LAN) SFP
10x 1GE(LAN) SFP
1xCOC12/4xCOC3 CH-CE
10x 1GE(LAN) SFP
10x 1GE(LAN) SFP
4x 10GE(LAN) SFP+
.
CLI Explorer
23.
11. If the router detects a
command.
Copyright © 2017, Juniper Networks, Inc.