Mx104 Routing Engine Auxiliary And Console Ports Specifications; Cable Specifications; Pinouts; Port Cable And Pinout Specifications - Juniper MX104 Hardware Manual

Related
Documentation

MX104 Routing Engine Auxiliary and Console Ports Specifications

Cable Specifications

Pinouts

Copyright © 2017, Juniper Networks, Inc.
Table 57: Ethernet Port Pinouts (continued)
Pin Signal
5 BI–_D3
6 RX–_D2
7 BI+_D4
8 BI–_D4
MX104 Routing Engine Overview on page 21
Maintaining the MX104 Routing Engines on page 192
The Routing Engine contains two ports labeled
NOTE: The AUX port is not supported.
The ports are asynchronous serial interfaces that accept an RJ-45 connector. The ports
connect the Routing Engine to an auxiliary or console management device.
Table 59 on page 86 describes the RJ-45 connector pinout.
Cable Specifications on page 85
Pinouts on page 85
Table 58 on page 85 lists the specifications for the cables that connect to console port.

Table 58: MX104 Routing Engine Console Port Cable Specifications

Specification
Cable specification
Cable/wire supplied
Maximum length
Router receptacle
Table 59 on page 86 describes the RJ-45 connector pinout.
Chapter 9: Port Cable and Pinout Specifications
Description
Bidirectional–
Receive data–
Bidirectional+
Bidirectional–
and .
AUX CONSOLE
Value
RS-232 (EIA-232) serial cable
One 6-ft (1.83-m) length with RJ-45/DB-9
connectors
6 ft (1.83 m)
RJ-45 female
85