Figure 25: Install The Front-Mounted Router In The Rack - Juniper MX104 Hardware Manual

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Install a mounting screw into each of the open mounting holes aligned with the rack,
5.
starting from the bottom.
Visually inspect the alignment of the router. If the router is installed properly in the
6.
rack, all the mounting screws on one side of the rack should be aligned with the
mounting screws on the opposite side and the router should be level.

Figure 25: Install the Front-Mounted Router in the Rack

1— Rack
2—MX104 router
Preparing the Site for the MX104 Router Overview on page 71
Installing and Connecting an MX104 Router Overview on page 109
Connecting the MX104 Router to Earth Ground on page 113
Chapter 14: Installing the MX104 Router
3— Mounting screws
111