Port Cable And Pinout Specifications; Mx104 Clocking And Timing Ports Overview - Juniper MX104 Hardware Manual

CHAPTER 9

Port Cable and Pinout Specifications

MX104 Clocking and Timing Ports Overview

Copyright © 2017, Juniper Networks, Inc.
MX104 Clocking and Timing Ports Overview on page 83
MX104 Routing Engine Ethernet Port Specifications on page 84
MX104 Routing Engine Auxiliary and Console Ports Specifications on page 85
MX104 Routing Engine USB Port Specifications on page 86
MX104 Alarm Contact Port Specifications on page 87
MX104 BITS Port Specifications on page 89
MX104 1-PPS and 10-MHz GPS Port Specifications on page 90
MX104 Time of Day Port Specifications on page 90
Four Subminiature B (SMB) connectors (for 10-MHz and 1-PPS), one RJ-48 port (for
BITS), and one RS-232 port (for TOD) on the front panel of the router connect to external
clock signal sources. The clocking ports provide the synchronized output clocks from any
one of the reference clock inputs based on the clock's priority.
The reference clock inputs can be Ethernet-recovered clocks, T1 or E1 line clocks, IEEE
1588v2-recovered clocks, BITS timing, 10-MHz timing, and 1-PPS timing. The T1 or E1 line
clock also supports loop timing. These clocking ports distribute a synchronized clock
signal throughout the chassis by locking onto the selected clock source. In the absence
of these configured ports, the local oscillator present in the system provides the chassis
synchronization.
Clock sources within the MX104 router include:
External clock timing port
10-MHz timing connectors (one input and one output)
1-pulse-per-second (PPS) connectors (one input and one output)
Time-of-day (TOD) RS-232 port
Synchronous Ethernet support on SFP ports as timing input or output
Packet (IEEE 1588-2008) v2 timing includes:
Timing input when configured as Ordinary Clock (OC) or Boundary Clock (BC)
83