Installing The Mx104 Router In The Rack - Juniper MX104 Hardware Manual

3d universal edge router
Hide thumbs Also See for MX104:
Table of Contents

Advertisement

MX104 3D Universal Edge Router Hardware Guide
Related
Documentation

Installing the MX104 Router in the Rack

110
DC-powered models—See
page
117.
Perform initial configuration of the router by following instructions in
8.
Configuring the MX104 Router" on page
MX104 3D Universal Edge Router Overview on page 3
NOTE:
The router can be installed horizontally in a rack or cabinet.
To install the router in the rack (see
CAUTION:
Before front mounting the router in a rack, have a qualified
technician verify that the rack is strong enough to support the router's weight
and is adequately supported at the installation site.
NOTE:
One person must be available to lift the router while another secures
it to the rack.
CAUTION:
If you are mounting multiple units on a rack, mount the heaviest
unit at the bottom of the rack and mount the other units from the bottom of
the rack to the top in decreasing order of the weight of the units.
Ensure that the rack is in its permanent location and is secured to the building. Ensure
1.
that the installation site allows adequate clearance for both airflow and maintenance.
Position the router in front of the rack or cabinet.
2.
Hold onto the bottom of the chassis and carefully lift it so that the mounting brackets
3.
contact the rack rails.
WARNING:
To prevent injury, keep your back straight and lift with your
legs, not your back. Avoid twisting your body as you lift. Balance the load
evenly and be sure that your footing is solid.
Align the mounting brackets with the holes in the rack rails.
4.
"Connecting DC Power Cables to the MX104 Router" on
129.
Figure 25 on page
111):
Copyright © 2017, Juniper Networks, Inc.
"Initially

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents