MX104 3D Universal Edge Router Hardware Guide
Related
Documentation
Replacing an MX104 Fan Tray
Removing an MX104 Fan Tray
146
Figure 40: Installing the Air Filter
Removing an MX104 Air Filter on page 143
1.
Removing an MX104 Fan Tray on page 146
Installing an MX104 Fan Tray on page 147
2.
NOTE:
To prevent overheating, install the replacement fan tray immediately
after removing the existing fan tray.
To remove the fan tray (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Loosen the captive screws on the corners of the fan tray faceplate.
2.
Grasp the fan tray handle, and begin to pull the fan tray from the chassis.
3.
Figure 41 on page
147):
Copyright © 2017, Juniper Networks, Inc.