MX104 3D Universal Edge Router Hardware Guide
Related
Documentation
MX104 Routing Engine USB Port Specifications
86
Table 59: Console Port Pinouts
Pin
Signal
1
RTS
2
DTR
3
TXD
4
Ground
5
Ground
6
RXD
7
DSR/DCD
8
CTS
MX104 Routing Engine Overview on page 21
Maintaining the MX104 Routing Engines on page 192
The following Juniper Networks USB Flash drives have been tested and are officially
supported for the USB port on all MX Series routers:
RE-USB-1G-S
RE-USB-2G-S
RE-USB-4G-S
CAUTION:
Any USB memory product not listed as supported for MX Series
routers has not been tested by Juniper Networks. The use of any unsupported
USB memory product could expose your MX Series router to unpredictable
behavior. Juniper Networks Technical Assistance Center (JTAC) can provide
only limited support for issues related to unsupported hardware. We strongly
recommend that you use only supported USB Flash drives.
All USB Flash drives used on MX Series routers must have the following features:
USB 2.0 or later.
Formatted with a FAT or MS-DOS file system.
Description
Request to Send
Data Terminal Ready
Transmit Data
Signal Ground
Signal Ground
Receive Data
Data Set Ready
Clear to Send
Copyright © 2017, Juniper Networks, Inc.