Power Supply Leds; Figure 18: Dc Power Supply; Table 50: Power Supply Led - Juniper MX104 Hardware Manual

Power Supply LEDs

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.

Figure 18: DC Power Supply

One LED labeled
PS STATUS
describes the system LED in more detail.

Table 50: Power Supply LED

Label Color
Green
PS STATUS
Yellow
Red
—
Connecting AC Power Cords to the MX104 Router on page 115
Connecting DC Power Cables to the MX104 Router on page 117
MX104 AC Power Specifications on page 95
MX104 DC Power Specifications on page 99
Chapter 6: Power System Components and Descriptions
indicates the status of the power supply.
State Description
On steadily Power supply is functioning normally, and input
voltage is within allowable operating range.
On steadily Primary OTP
Blinking Secondary OTP
On steadily Power supply is receiving input voltage below the
allowable operating range, but the redundant power
supply is functioning normally.
Off Power supply is receiving input voltage below the
allowable operating range and is not part of a
redundant configuration.
Table 49 on page 63
65