Table 72: Accessory Box Parts List For An Mx104 Router - Juniper MX104 Hardware Manual

Copyright © 2017, Juniper Networks, Inc.
Table 71: Parts List for a Fully Configured MX104 Router (continued)
Component
Air filter
Quick start installation instructions
Blank panels for slots without components installed

Table 72: Accessory Box Parts List for an MX104 Router

Component
USB media kit
Phillips screws, 10-32 x 1/2, with square cone sems washers
Phillips screws, M3 x 10 mm, with square cone sems washers
Ground terminal lug, two hole, sized for #10 screws, 14 AWG
Philips screws, 6-32 x 1/4 in.
DC power ring terminal 6-14 AWG
RJ-45 cable with RJ-45 Jack to female DB-9
ESD wrist strap with cable
Read Me
Affidavit for T1 connection
Documentation card
Quick Start installation instructions
Juniper Networks Product Warranty
End User License Agreement
NOTE: AC power cords are not included in the accessory box. You must
purchase them separately. For information on AC power cord, see
AC Power Cord Specifications" on page
Chapter 13: Unpacking the MX104 Router
Quantity
1
1
One blank panel for each slot not
occupied by a component
Quantity
1
2
2
1
4
6
1
1
1
1
1
1
1
1
96.
"MX104
107