MX104 3D Universal Edge Router Hardware Guide
Related
Documentation
Installing an MX104 Fan Tray
148
Figure 42: Installing the Fan Tray
MX104 Cooling System and Airflow Overview on page 19
Replacing an MX104 Air Filter on page 143
To install the fan tray (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Orient the fan tray in the slot so that the arrow is pointing up, and slide the fan tray
2.
straight into the chassis.
Verify that the front of the fan tray is firmly seated in the chassis.
3.
Tighten the captive screws on the fan tray faceplate to secure it in the chassis.
4.
Figure 42 on page
148):
Copyright © 2017, Juniper Networks, Inc.