Mx104 Modular Interface Card (Mic) Overview; Front-Pluggable Mics; Built-In 10-Gigabit Ethernet Mic - Juniper MX104 Hardware Manual

MX104 3D Universal Edge Router Hardware Guide
Related
Documentation

MX104 Modular Interface Card (MIC) Overview

Front-Pluggable MICs

Built-in 10-Gigabit Ethernet MIC

58
Interface
...
coc3-0/2/0
coc1-0/2/0:1
coc3-0/2/1
coc1-0/2/1:1
coc3-0/2/2
coc1-0/2/2:1
coc3-0/2/3
coc1-0/2/3:1
...
MX104 3D Universal Edge Router Overview on page 3
MX104 Hardware and CLI Terminology Mapping on page 6
MX104 Chassis Overview on page 4
MICs receive incoming packets from the network and transmit outgoing packets to the
network. During this process, each MIC performs framing and high-speed signaling for
its media type. Before transmitting outgoing data packets through the MIC interfaces,
the Packet Forwarding Engine encapsulates the packets received.
The MX104 routers support the following types of MICs:
Front-Pluggable MICs on page 58
Built-in 10-Gigabit Ethernet MIC on page 58
MIC LEDs on page 60
Modular Interface Cards (MICs) install into four slots in the front of the MX104 router and
provide the physical connections to various network media types. MICs are hot-removable
and hot-insertable. The slots are labeled
different media types on the same router as long as the router supports those MICs. For
complete specifications, see
MX Series Interface Module Reference
The built-in 10-Gigabit Ethernet MIC is fixed on the MX104 router. The MIC is labeled
and is located on the front panel.
NOTE: If you ordered a license for the built-in 10-Gigabit Ethernet ports on
the MX104 and you do not receive a paper license with your shipment, open
a case with customer support. See
for more information.
Admin Link Proto Local
up up
up up
up up
up up
up up
up up
up up
up up
0/0 , 0/1 , 1/0
"MICs Supported by MX Series Routers" on page 49
.
"Contacting Customer Support" on page 203
Remote
, and 1/1 . You can install MICs of
Copyright © 2017, Juniper Networks, Inc.
in the
XE