Juniper MX104 Hardware Manual page 192

MX104 3D Universal Edge Router Hardware Guide
Related
Documentation
168
Remove the rubber safety cap from the transceiver and the end of the cable. Insert
7.
the cable into the transceiver.
WARNING: Do not look directly into a fiber-optic transceiver or into the
ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cable
connected to a transceiver emit laser light that can damage your eyes.
Verify that the status LEDs on the front panel indicate that the transceiver is functioning
8.
correctly. For more information about the component LEDs, see the
Overview" on page 11.
MX104 Chassis Overview on page 4
MX104 Modular Interface Card (MIC) Overview on page 47
Maintaining the MX104 MICs and Network Ports on page 192
"MX104 LEDs
Copyright © 2017, Juniper Networks, Inc.