Mx104 Port And Interface Numbering; Identifying Interface Numbers On The Hardware - Juniper MX104 Hardware Manual

Table 46: MICs Supported by MX5, MX10, MX40, MX80, and MX104 Routers (continued)
MIC Name
Channelized OC3/STM1
(Multi-Rate) Circuit Emulation
MIC with SFP (H)
Tri-Rate
Tri-Rate MIC
Services
Multiservices MIC
SONET/SDH
SONET/SDH OC192/STM64 MIC
with XFP
Related
Documentation

MX104 Port and Interface Numbering

Identifying Interface Numbers on the Hardware

Copyright © 2017, Juniper Networks, Inc.
MIC Model Number
MIC-4COC3-1COC12-CE-H
MIC-3D-40GE-TX
MS-MIC-16G
MIC-3D-1OC192-XFP
MX Series MIC Overview
MIC/MPC Compatibility
Identifying Interface Numbers on the Hardware on page 53
Identifying Interface Numbers in the CLI on page 55
Each MX104 router has three built-in MPCs, which are represented in the CLI as
through FPC 2 . The numbering of the MPCs is from bottom to top (see
Figure 14 on page 54).
NOTE: The port numbers on MICs correspond to the port numbers on the
interface. The port numbering on the MIC-3D-20GE-SFP-EH MIC depicted
in Figure 14 on page 54
Each MIC might number ports differently—horizontally or vertically, for
example—and it is important to review the port numbering for your particular
MIC in the
MX Series Interface Module Reference
Chapter 5: Line Card Components and Descriptions
P o r t s MX5 MX10
- - -
40 – 11.2R4
0 13.2 13.2
Rear Rear
slot slot
only. only.
1 12.2 12.2
is only one example of the port numbering for MICs.
.
MX40 MX80 M X 1 0 4
- - 13. 2 R2
11.2R4 10.2 13. 2 R2
13.2 13.2 13. 3 R2
Rear Rear slot
slot only.
only. Supported
on the
modular
MX80 and
fixed
MX80-48T
12.2 12.2 13.3
FPC 0
53