MX104 3D Universal Edge Router Hardware Guide
Related
Documentation
Replacing an MX104 AC Power Supply
Removing an MX104 AC Power Supply
170
Figure 51: Installing an AC Power Supply
Connecting AC Power Cords to the MX104 Router on page 115
Removing an MX104 AC Power Supply on page 170
MX104 AC Power Specifications on page 95
MX104 AC Power Cord Specifications on page 96
Removing an MX104 AC Power Supply on page 170
1.
2.
Installing an MX104 AC Power Supply on page 172
Before you remove a power supply, be aware of the following:
NOTE:
The minimum number of power supplies must be present in the router
at all times.
CAUTION:
To maintain proper cooling and prevent thermal shutdown of the
operating power supply unit, each power supply slot must contain either a
power supply or a blank panel. If you remove a power supply, you must install
a replacement power supply or a blank panel shortly after the removal.
NOTE:
After powering off a power supply, wait at least 60 seconds before
turning it back on.
Copyright © 2017, Juniper Networks, Inc.