Juniper MX104 Hardware Manual page 235

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
For more information about the command, see the
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
3.
ESD points on the chassis.
Shut down power to the router by pressing the AC input switch or DC circuit breaker
4.
for all power supplies to the off (
Disconnect power from the router.
5.
Remove the cables that connect to all external devices.
6.
Remove all field replaceable units (FRUs) from the router.
7.
Remove the router from the rack. One person should grasp the router while a second
8.
person unscrews and removes the mounting screws from the rack. One lifter can then
move the router to the shipping container.
Place the router in the shipping container.
9.
Cover the router with an ESD bag and place the packing foam on top of and around
10.
the router.
Replace the accessory box on top of the packing foam.
11.
Securely tape the box closed.
12.
Write the RMA number on the exterior of the box to ensure proper tracking.
13.
Contacting Customer Support on page 203
Returning a Hardware Component to Juniper Networks, Inc. on page 209
Guidelines for Packing Hardware Components for Shipment on page 210
Chapter 29: Packing and Returning Components
CLI Explorer
) position.
O
.
211