Juniper MX104 Hardware Manual page 155

Copyright © 2017, Juniper Networks, Inc.
[edit]
root@# set system backup-router address
Configure the IP address of a DNS server.
11.
[edit]
root@# set system name-server address
Set the root authentication password by entering either a clear-text password, an
12.
encrypted password, or an SSH public key string (DSA or RSA):
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
or
[edit]
root@# set system root-authentication encrypted-password encrypted-password
or
[edit]
root@# set system root-authentication ssh-dsa public-key
or
[edit]
root@# set system root-authentication ssh-rsa public-key
(Optional) Configure the static routes to remote subnets with access to the
13.
management port. Access to the management port is limited to the local subnet. To
access the management port from a remote subnet, you need to add a static route
to that subnet within the routing table. For more information about static routes, see
the Junos OS Administration Library.
[edit]
root@# set routing-options static route remote-subnet next-hop destination-IP retain
no-readvertise
Configure the telnet service at the
14.
[edit]
root@# set system services telnet
(Optional) Display the configuration to verify that it is correct.
15.
[edit]
root@# show
system {
host-name host-name;
domain-name domain-name;
backup-router address;
root-authentication {
authentication-method (password | public-key);
Chapter 17: Initially Configuring the MX104 Router
hierarchy level.
[edit system services]
131