Instruction Manual
D103563X012
Key
Description
Common Parts
(see figure 7‐2, 7‐3, and 7‐4)
DVC6200p and DVC6205p
(1)
16* O‐ring
(3 req'd)
29
Warning label, for use only with LCIE hazardous area
classifications
33
Mach Screw, pan hd, SST
38
Cap Screw, hex socket, SST
43* Cover Assembly (includes cover screws)
Standard
Extreme temperature
48
Nameplate
49
Screw, self tapping (2 req'd)
Not required for relay A
(7)
61
Pipe Plug, hex socket
Housing A with relay C (2 req'd ) (used for GX actuator)
Housing A with relay B (1 req'd) (used for GX actuator)
Housing B with relay B and C (1 req'd)
(used for all actuators except GX)
63
Lithium grease (not furnished with the instrument)
64
Pipe thread sealant, anaerobic (not furnished with the
instrument)
65
Lubricant, silicone sealant (not furnished with the instrument)
(2)
154
Retaining Ring
(3 req'd)
236
Screen (required for relay B and C only)
(1)
237
Module Base Seal
Module Base
(see figure 7‐2 and 7‐4)
DVC6200p and DVC6205p
(7)
2
Module Base
(7)
11
Drive Screw
(2 req'd)
(1)
12
O‐ring
(7)
19
Label, Shield Assembly
(7)
61
Pipe Plug, hex socket
(3 req'd)
243
Slotted Pin (flame arrestor)
*Recommended spare
1. Available in the Elastomer Spare Parts Kit
2. Available in the Small Hardware Spare Parts Kit
3. Available in the Seal Screen Kit
6. Available in the I/P Converter Kit
7. Available in the Spare Module Base Assembly Kit
8. Available in the Spare Housing Assembly Kit
9. Available in the Spare Shroud Kit
Part Number
(2)
(3 req'd)
(2)(7)
(3 req'd)
38B9580X022
38B9580X032
(7)
(8)
(7)
(3 req'd)
Figure 7‐1. Terminal Box of Natural Gas Certified
FIELDVUE DVC6200p Digital Valve Controller
WIRING CONNECTOR
GAS‐BLOCKING
PRESS‐FIT ADAPTOR
W9923‐1 profibus
I/P Converter Assembly
(see figure 7‐2 and 7‐4)
DVC6200p and DVC6205p
23
Cap Screw, hex socket, SST
(1)(3)(6)
39* O‐ring
(6)
41
I/P Converter
(6)(9)
169
Shroud
(not shown, see figure 6‐4)
(1)(6)
210* Boot, nitrile
(2 req'd) (see figure 6‐4)
(1)(3)(6)
231* Seal Screen
Relay (see figure 7‐2 and 7‐4)
DVC6200p and DVC6205p
24* Relay Assembly, (includes shroud, relay seal, mounting screws)
Standard
Standard Bleed
Housing A (used for GX actuator)
Single‐/acting direct (relay C)
Single‐acting reverse (relay B)
Housing B (used for all actuators except GX)
Single‐acting direct (relay C)
Double‐acting (relay A)
Single‐acting reverse (relay B)
Parts
June 2017
(2)(9)
(4 req'd)
38B5786X182
38B5786X172
38B5786X132
38B5786X052
38B5786X092
61