Parts Ordering - Fisher A11 Instruction Manual

A11 Valve
22
SOCKET HEAD CAP OR
RETAINING RING SCREWS
2
RETAINING RING
NOTE:
REQUIRED FOR FIRE SAFE, METAL SEATED AND CRYOGENIC VALVES.
1
E0574 / IL

Parts Ordering

When corresponding with your Emerson Process
Management sales office about a Type A11 valve,
please mention the valve serial number which is
stamped on the nameplate and the part number from
the following list.
WARNING
Use only genuine Fisherr replacement
parts. Components that are not
supplied by Emerson Process
Management should not, under any
16
9
BACK-UP RING
8
SEAL RING
17
GASKET 1
Figure 9. Typical Type A11 Valve Assembly
16
PACKING HEX NUTS
12
PACKING FLANGE
13
PACKING
FOLLOWER
15
PACKING
STUDS
1
BODY
10
BEARING
circumstances, be used in any Fisher
valve, because they will void your
warranty, might adversely affect the
performance of the valve, and could
give rise to personal injury and
property damage.
Note
Neither Emerson, Emerson Process
Management, nor any of their affiliated
entities assumes responsibility for the
selection, use and maintenance of any
product. Responsibility for the
selection, use, and maintenance of any
product remains with the purchaser
and end-user.
4
SHAFT, UPPER
14
PACKING SET
10
BEARING
6
SHAFT/DISC PINS
3
VALVE DISC
5
LOWER (FOLLOWER)
SHAFT