Alarm Transducer Block - Fisher FIELDVUE DVC6200p Instruction Manual

Blocks —Alarm Transducer Block
June 2017

Alarm Transducer Block

Parameters
The logbook includes time stamp with each alert.
D Read/Write Capability: RO - Read Only, RW - Read Write
D Mode: The block mode(s) required to write to the parameter
D Double indentation and shared Index Number indicates sub‐parameter
Table C‐12. Alarm Transducer Block Parameter Definitions
Label
PARAMETER_NAME
BLOCK_OBJECT
RESERVED
BLOCK_OBJECT
PARENT_CLASS
CLASS
DEV_REV
DEV_REV_COMP
DD_REVISION
PROFILE
PROFILE_REVISION
EXECUTION_TIME
NUMBER_OF_PARAMETERS
ADDRESS_OF_VIEW_1
NUMBER_OF_VIEWS
124
Index RO / Block
Number RW Mode
0 RO
0.1
0.2 3: Transducer Block
1 - 8: Reserved
9: Alarm
0.3
10 - 127: Reserved
0.4 1: Binary Message
0.5
0.6
0.7
Octet 1: Number of PA
profiles within PI Profile
Class. Set to 0x40.
Octet 2:
0x01: Class A, all standard
params have their own
0.8
memory place.
0x02: Class B, all standard
params have their own
memory place.
0x81: Class A, all standard
params in 1 memory place.
Octet 1: Number before the
decimal point.
0.9
Octet 2: Number after the
decimal point.
0.10
0.11
Octet 1 (MSB): Slot.
Octet 2: (LSB): Index of
0.12
View_1 parameter for
access
0.13
Range Initial Value
-
250
3
9
1
1
1
0
0x4002
0x0302
0
0x36
0x0746
0x01
Instruction Manual
D103563X012
Description
Data Type: DS‐32 First parameter of every
block. Contains characteristics of the block, eg.
Block type and profile number
Data Type: Unsigned8
Data Type: Unsigned8 Identifies the block.
Data Type: Unsigned8
Identifies which class the device belongs to.
Data Type: Unsigned8 Identifies the type of
device.
Data Type: Unsigned16
Contains information about the device's
revision. Increased when there is a new
firmware release.
Data Type: Unsigned16 Represents the lowest
device revision which is supported by the
device.
Data Type: Unsigned16
Data Type: Octet String
Profile Class given by PI, and description of
profile
Data Type: Unsigned16
Profile revision used for this device.
Data Type: Unsigned8
Data Type: Unsigned16
Number of used parameters in the block.
Data Type: Unsigned16
Address of View 1 parameter, see table C‐13.
Data Type: Unsigned8
Number of view objects of the block.